Select Page

A vacuum pump is a device that removes gas molecules from a sealed quantity in order to keep behind a partial vacuum. The initial vacuum pump was created in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover an array of operating pressures. Laboratory/filtration vacuum pumps are for make use of in the laboratory or anywhere a minimal vacuum is needed; typically give both vacuum and pressure capabilities. Use rough vacuum pumps (or roughing pumps) for laboratory and commercial applications requiring a level of vacuum significantly less than 10-3 Torr. Use high vacuum pressure pumps if you want vacuums higher than 10-3 Torr. Also, consider the free-air capacity needed (the bigger the free air capability, the faster it’ll evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dried out or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum amounts, and lower noise, but can contaminate the system and require more maintenance.

Industrial Vacuum Pumps
Vacuum Pumps
Our selection of industrial vacuum pumps includes oil-less and oil-flooded choices. We are able to customize a pump to suit your specific needs and provide you with guidance with regards to deciding on the best pump for you. You may expect high-quality, long-lasting results when you select Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-less rotary vane vacuum pumps made to operate on a continuous basis at any point from atmospheric pressure to vacuum pressure level of 27” HgV (75 torr). These direct get units are given a high efficiency TEFC, C-encounter, flange mounted electric motor. Each one of these pumps has an integral vacuum relief valve, a 5μ inlet filter, and vibration isolators as regular equipment.