Select Page

Product Description

Description

 

HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.

Main Product features
 

To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.

Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12

 

 

New Manual Override Countershaft Valve Connection Actuator Connection
b1 N b2 M D1 4-M1 D2 4-M2 E D3 4-Φ1 D4 4-Φ2
HDM-1 14 22 14 16 Φ50 4-M6 Φ70 4-M8 70*70 Φ50 4-Φ6.5 Φ70 4-Φ8.5
HDM-2 17 22 17 18 Φ70 4-M8 Φ102 4-M10 95*95 Φ70 4-Φ8.5 Φ102 4-Φ10.5
HDM-3 22 28 22 22 Φ102 4-M10 Φ125 4-M12 114*114 Φ102 4-Φ10.5 Φ125 4-Φ12.5
HDM-4 27 32 27 30 Φ102 4-M10 Φ125 4-M12 129*129 Φ125 4-Φ12.5 Φ140 4-Φ16.5
HDM-5 36 45 36 38 Φ140 4-M16 / / 156*156 Φ140 4-Φ17 Φ165 4-Φ21
HDM-6 46 50 46 48 Φ165 4-M20 / / 160*160 Φ165 4-Φ22 / /

New Manual Override A B ΦC F T Y H S K Ratio Rated Input Rated Onput
HDM-1 90 55 Φ88 115 44 145 120 53 10 26:1 Nm 250Nm
HDM-2 125 64 Φ110 135 62.5 178 133 56.5 13 28:1 Nm 450Nm
HDM-3 140 71 Φ129 166 70 212 180 68.7 12.5 38:1 Nm 700Nm
HDM-4 188.5 93 Φ174 202 94 280 195 84 15 54:1 Nm 1200Nm
HDM-5 222 110 Φ205 245 110 315 225 92 15 80:1 Nm 2000Nm
HDM-6 252 120 Φ275 280 125 320 252 102 15 78:1 Nm 3000Nm

1.  Question:What is your main products?

   Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
 

2. Question:Are you a trader or manufacturer ?

   Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
 

3. Question:How do your make the quality guarantee for actuators?

   Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .

4.  Question:When can I receive the Price of valve actuators ?

   Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
 

5. Question:How to order our pneumatic actuators and electric actuators ?

   Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
 

6. Question:How can I get a sample to check your quality?

   Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
 

7. Question:Shall we pay the sample cost and transportation cost ?

   Answer:We will provide the sample by free of charge. Your will bear the freight cost.
 

8. Question:How long to prepare the sample ?

   Answer:Most of our products are under regular production and some of them we keep in stocks.
 

9. Question:How to delivery the sample to our place?

   Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
 

10. Question:What about the delivery date if we place the formal order ?

   Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Function: Change Drive Direction, Speed Changing
Layout: Coaxial
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Double-Step
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm gearbox

Is it Possible to Reverse the Direction of a Worm Gearbox?

Yes, it is possible to reverse the direction of a worm gearbox by changing the orientation of either the input or output shaft. However, reversing the direction of a worm gearbox can have some implications that need to be considered:

  • Efficiency: Reversing the direction of a worm gearbox can potentially affect its efficiency. Worm gearboxes are typically more efficient in one direction of rotation due to the design of the worm and worm wheel.
  • Backlash: Reversing the direction of rotation might lead to increased backlash or play in the gearbox, which can impact precision and smooth operation.
  • Lubrication: Depending on the gearbox’s design, reversing the direction could affect lubrication distribution and lead to uneven wear on the gear teeth.
  • Load: Reversing the direction might also impact the gearbox’s load-carrying capacity, especially if it’s designed for predominantly one-way operation.
  • Noise and Vibration: Direction reversal can sometimes result in increased noise and vibration due to changes in gear engagement and meshing behavior.

If you need to reverse the direction of a worm gearbox, it’s advisable to consult the gearbox manufacturer’s guidelines and recommendations. They can provide insights into whether the specific gearbox model is suitable for reversible operation and any precautions or adjustments needed to ensure proper functioning.

worm gearbox

Diagnosing and Fixing Oil Leakage in a Worm Gearbox

Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:

  1. Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
  2. Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
  3. Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
  4. Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
  5. Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
  6. Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
  7. Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
  8. Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
  9. Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
  10. Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.

If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.

worm gearbox

How to Select the Right Worm Gearbox for Your Application

Selecting the right worm gearbox for your application involves careful consideration of various factors:

  • Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
  • Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
  • Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
  • Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
  • Mounting Options: Determine the mounting orientation and configuration that best suits your application.
  • Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
  • Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
  • Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
  • Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
  • Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.

Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.

China factory Gearbox Manual Override Declutchable Gear for Pneumatic Actuator   with Hot selling		China factory Gearbox Manual Override Declutchable Gear for Pneumatic Actuator   with Hot selling
editor by CX 2024-03-30